Vacuum Table Upgrade

Listing ID #:30                                                                                                                Back

Slideshow image
Price (USD): $1,220

Short Description: The Vacuum table helps you hold down material as you carve the pattern.

Full Description: The Vacuum table helps you hold down material as you carve the pattern. The vacuum table is divided into different zones. When the vacuum is on, there will be a absorption power to hold the materials. Smaller CNC Tables are divided into 6 zones and larger tables are divided into 12 zones. Vacuum tables have valves that let you open/close the desired zone. You can open all the valves, let all the 6 zones absorb materials. Or only use one zone. Of course, only one zone working the pressure will be higher than all 6 zones working. But even 6 zones working together, the pressure is big enough for holding down working sheets. You can run 1 zone to 6 zones in any combination with the shutoff valves.
# Add the Vacuum adsorption( vacuum pump) 3phase 380v: $1,220
# Dust collector system: $496 (380V) $1,278
# Dust Collector: Fits Router $95

Specifications: The vacuum pump is 5.5kw (3phase 380v) , the pressure is -0.0945 Mpa. We also have a bigger model pump 7.5kw. But in former cases, we usually use 5.5kw.


Vacuum table and dust collector Shut off valves for zones Shut off valves and vacuum table with 6 zones Shut off valves and vacuum table with 12 zones



Phone: 250-423-3091
Homepagehttp://www.cnctable.com
Info: CNCTable.com
Email: sales@cnctable.com
Phone #: 001 (250) 423-3091
Dealer inquires welcome!



This listing has been viewed 7062 times.