Short Description: The Vacuum table helps you hold down material as you carve the pattern.
Full Description: The Vacuum table helps you hold down material as you carve the pattern. The vacuum table is divided into different zones.
When the vacuum is on, there will be a absorption power to hold the materials.
Smaller CNC Tables are divided into 6 zones and larger tables are divided into 12 zones. Vacuum tables have valves that let you open/close the desired zone.
You can open all the valves, let all the 6 zones absorb materials. Or only use one zone.
Of course, only one zone working the pressure will be higher than all 6 zones working.
But even 6 zones working together, the pressure is big enough for holding down working sheets. You can run 1 zone to 6 zones in any combination with the shutoff valves.
# Add the Vacuum adsorption( vacuum pump) 3phase 380v: $1,220
# Dust collector system: $496
(380V) $1,278
# Dust Collector: Fits Router $95
Specifications: The vacuum pump is 5.5kw (3phase 380v) , the pressure is -0.0945 Mpa. We also have a bigger model pump 7.5kw.
But in former cases, we usually use 5.5kw.
|